How to use PAX 3

Your PAX 3 arrives ready to use out of the box. Click here to download the PAX 3 complete user guide. Click here to view the PAX 3 quick start guide. 

Here's some tips for a great session

1. Grind material to a medium-coarse consistency (not a fine grind).
2. Loadthe oven completely full and tamp it down firmly. No material should fall out if you shake PAX with the oven lid off. 
   - Use Half Pack Oven Lid for smaller sessions.
3. Temperature: Start with the default temperature setting (medium) if this is your first time using your PAX. Increase to your liking.
4. Draw: "Sip it, don’t rip it!" A short 3-5 second, gentle draw from the mouthpiece is all that's needed. Drawing harder, or for longer, will not create more vapor.

Basics

The power button is engaged by pressing the center of the mouthpiece. A quick press turns on PAX, and the oven immediately starts heating. 

Change the temperature setting after turning on PAX by long pressing the power button until LEDs change. Then short presses of the power button cycle through the preset settings. To confirm either shake the device or long press the power button.

To check battery life turn on PAX and shake. LEDs will illuminate displaying the approximate battery level.

The videos below will help you to properly prepare and use your PAX 3.

Grinding and Packing

Vaporizing

Changing the temperature setting

Dos and Don'ts