Pax Customer Support

You'll need the serial number to register or request warranty service. To locate your Era Pro's serial, remove the pod and look into the device. You'll find the serial printed along the top of the pod area in white.

It's easy to tell Era and Era Pro apart. The easiest way is to check the bottom. Era Pro uses a USB-C charging port. The previous Era uses a Micro-USB port. Addtionally, the serial number on the Era Pro is located on the inside and top of the device. The original Era's serial number is on the outside bottom of the device.

Era Pro comes in four finishes.

• Black
• Jade
• Grey
• Red

Era Pro Is the latest addition to the Era line. Era Pro Features:

• Haptic Feedback
• Dose Control
• 14% larger battery capacity
• USB-C Charging
• PAXSmart Experience
• Available in four finishes

You can adjust temperature on your Era Pro device using the new Pop and Click gesture

1. Pop your pod up — no need to take it out all the way.
2. Quickly drop your pod back down to advance to the next temperature (no need to push it in completely). The device will vibrate and the petals will glow yellow to indicate the temperature that the device is set to.

Do steps 1 and 2 repeatedly to continue cycling through the temperature settings. When you see your desired setting, click the pod back into place.

Your device can be quickly recharged to get you back up and ready for your next use. When charging, the petals will pulse to indicate the level of charge the device currently has. Device should reach fully charged state in around ~45 minutes.

1 petal pulsing white = 0-25%
2 petals pulsing white = 25%-50%
3 petals pulsing white = 50%-75%
4 petals pulsing white= 75%-100%
4 petals Light Blue= fully charged

Shake your Era Pro gently to display your current charge on the LED. Your current battery level will be represented by the number of petals that light up.

When your device is at a low battery level, the top left petal will blink red repeatedly. It will do this both when you check the battery level by shaking the device, and also after a draw.

When your device is at a critically low battery level, the top left petal will light up red for an extended period of time.

Era Pro can be charged using the included USB-C Cable.

Please Note: Portable electronics containing Lithium Ion batteries present rare, but potentially serious safety hazards, especially under hot or cold conditions. Charging of the PAX device should only be performed at temperatures between 32°F and 95°F (0°C and 35°C). To assure personal and property safety, never charge your PAX device below 32°F (0°C) or above 95°F (35°C). *Never charge or leave your PAX device in a vehicle.

PodID offers much-needed transparency, providing you detailed information about what makes up your oil concentrates. So you can be informed. So you can have clarity. And, ultimately, so you can consume with confidence. With PodID you can view the below information in the PAX Mobile App.

• State Regulated Test Results
• Strain and Potentcy Information
• Oil Contents & Flavor Profile
• Simply tap ""View Testing Results"" from your Control Center or any Strain Page in the PAX Mobile App.

Please note, as of 11/15/19, PAX Mobile for iOS is not available from the App Store. You may still download the PAX Mobile from Google Play. Read our full statement here

Yes, but without the PAXSmart experience. Use PodExplore to manually select your pod and view suggested temperatures along with PodID test results.

Please note, as of 11/15/19, PAX Mobile for iOS is not available from the App Store. You may still download the PAX Mobile from Google Play. Read our full statement here

Yes, but without the PAXSmart experience. Use PodExplore to manually select your pod and view suggested temperatures along with PodID test results.

Please note, as of 11/15/19, PAX Mobile for iOS is not available from the App Store. You may still download the PAX Mobile from Google Play. Read our full statement here

Era Pods with PAXSmart technology can be found in square boxed packaging, and have a red band directly below the mouthpiece. These pods will work with all PAX Era devices, but Era Pro is the only device which enables PAXSmart

Our Pod packaging is primarily constructed of recyclable paper with a layer of plastic lamination that ensures our packaging is Child Resistant. If you are in a region with a recycling program that can separate these two materials as part of their recycling process, then the package can be recycled. If you are not then the packaging must be thrown in the garbage/landfill. We are exploring future packaging solutions that provide Child Resistance without the need for plastic lamination.

In addition to recyclability, we ensure that we source the materials as sustainably as possible.

For more information on our packaging, click here

Yes, it is certified child-resistant carton, evaluated and tested to be in compliance with CFR Title 16, Part 1700

The Era pod utilizes a single 2mm silica wick, but unlike other cartridges which only use single ended wicks causing them to dry out quickly, both ends of the Era pod wick are submerged, allowing for improved wick saturation and performance across a full range of oil viscosities.

The Pod tank (in contact with the oil) is designed using all food grade plastics. Other Era pod components include gold plated brass, the nichrome heater and cotton batting to absorb condensation.

PAX Mobile App is available on the Google Play Store.

Please note, as of 11/15/19, PAX Mobile for iOS is not available from the App Store. You may still download the PAX Mobile from Google Play. Read our full statement here

To pair your Era Pro turn on Bluetooth and location services on your mobile device, then launch the PAX Mobile App. Now shake your Era Pro continuously for 2-5 seconds. The LED petals will illuminate blue indicating it's in pairing mode. PAX Mobile App will take care of the rest. Follow the prompts on the screen to finish pairing.

Please note, as of 11/15/19, PAX Mobile for iOS is not available from the App Store. You may still download the PAX Mobile from Google Play. Read our full statement here

Dose Control limits ingestion; allowing users to better understand their tolerances and manage consumption. It does not recommend or ensure ingestion of specific quantities.

Please note, as of 11/15/19, PAX Mobile for iOS is not available from the App Store. You may still download the PAX Mobile from Google Play. Read our full statement here

If your pod is not found, tap report missing pod in the search result screen

These features are only available only when using an Era Pro with a PAXsmart pod. Pods with PAXsmart Technology will have a red o-ring beneath the mouthpiece.

Era Pro can be locked from the app* to prevent it from producing vapor. This can be used to prevent children from using the device. If the device is locked, all four LEDs will pulse red when tryin to draw, and no vapor is produced.

The device will remain locked and will not allow any vapor to be drawn until it is unlocked from within the app. Era Pro will still show non-vapor related animations while locked.

*available only on Google Play as of 11/15/19

Your PAXSmart Pod comes preset by the Brand Partner with a recommended temperature for the best experience. When a PAXSmart Pod is inserted into Era Pro, the LEDs will display the temperature setting and vibrate.

The recommended temperatures are displayed in the PAX Mobile App for Android.