PAX 2 & PAX 3: Battery / Charging

Check Battery

While powered on, shake PAX to view battery level. Each solid LED petal represents 25% charge. If the top left LED petal blinks red your PAX needs a charge.

Charging PAX

To charge, plug the charger into a laptop/computer or wall adapter. Align device contacts with charger pins and place on charger. USB charge time is ~2.5 hours. We recommend a power source capable of supplying 1.5A.

When charging, each LED petal turns solid white as it reaches that charge level. Each petal represents 25% charge.

< 25% charge = all four LEDs pulse white
25% charged = one LED is solid white
50% charged = two LEDs are solid white
75% charged = three LEDs are solid white
100% charged = all four LEDs are solid white

Remaining LEDs will pulse as PAX continues to charge. (eg. 50% charge = 2 solid white, 2 pulsing white LEDs)

For PAX 2 general information check out this article with video.
For PAX 3 general information check out this article with videos.

Are you seeing something else while charging? Check out this article for help.

Please Note: Portable electronics containing Lithium Ion batteries present rare, but potentially serious safety hazards, especially under hot or cold conditions. Charging of the PAX device should only be performed at temperatures between 32°F and 95°F (0°C and 35°C). To assure personal and property safety, never charge your PAX device below 32°F (0°C) or above 95°F (35°C). Never charge or leave your PAX device in a vehicle.